Your new Coating and how to maintain it
​

FUSION PLUS  Ceramic CoatingsAftercare

• Using XPEL aftercare products when detailing your various surfaces will significantly extend the life of FUSION PLUS. Our products have been designed to complement our coatings and will help keep your surface looking newer, longer.
• It is highly recommended against using an automated car wash as the chemicals and brushes are extremely harsh on the surface of your vehicle.  All the time and money spent on the ceramic coating process will be ruined by going through these washes and your warranty will be voided.

Cleaning

• For exterior cleaning, we recommend using XPEL Rinse Free Car Wash on a weekly basis, to avoid excessive contamination buildup. Avoid washing in direct sunlight to minimize streaking and water spotting.
• Wash from the roof downwards, leaving the dirtiest sections last, avoiding possible cross-contamination. You can follow up with XPEL Detail Spray and XPEL Ceramic Boost for added gloss.
• For interior cleaning, we recommend using XPEL Interior Cleaner (as needed) on your leather, plastics, and non-fabric surfaces. For fabric areas, we recommend vacuuming and using a clean, dry microfiber. We recommend testing in an inconspicuous area before applying XPEL Interior Cleaner – please read directions before applying.

Drying

• Always dry the exterior surfaces completely using a clean, soft, lint free microfiber towel or air blower. Never allow water to evaporate on its own. Tap water can contain minerals which leave deposits on your coating, creating unwanted water spots.
• For best results use XPEL Microfiber Towels, which have been designed to absorb water. Always avoid aggressive wiping.

Detailing

• For exterior surfaces, follow washing and drying steps above. Follow up with XPEL Detail Spray for any left- over fingerprints or smudges on your paint protection film or surface. You can apply the XPEL Ceramic Boost (as needed) for added shine and slickness.
• Avoid applying XPEL Detail Spray or XPEL Ceramic Boost in direct sunlight, to minimize streaking and water spotting.

Spot Removal Of Surface Contamination

• Never use aggressive products to polish the coating or to removing surface contamination.
• Visit your authorized XPEL FUSION PLUS installer for any questions you have on your coated surfaces.

Vehicle Inspection Schedule

• To uphold the FUSION PLUS warranty, you must visit your FUSION PLUS certified installer (who applied your original coating), annually, during the duration of warranty. If you have had a change of address, please email [email protected] with any questions.

Warranty Coverage

• XPEL FUSION PLUS is warrantied from date of original application (upon registration) and maintained in accordance with outlined warranty and conditions. For complete warranty information visit xpel.com/warranty-information